The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page or by looking on the certificate on conformance (COC).
The COC can be downloaded by going
next...
Techspray does not offer replacement, only complete flux bottles. The needles are standard parts that are commonly used for automatic dispensing systems. You can find compatible needles with distributors
next...
The lifetime of a Plato 170 cutter is dependent on a number of variables, including the thickness of the wire or lead and the amount of force used in the cutting process.
The spring and hinge mechanism
next...
Licron Crystal is being used to turn a plexiglass divider into an ESD-safe divider. A common question is how to disinfect from pothogens like SARS-COV-2 (coronavirus -- the virus that causes COVID-19)
next...
The can of duster must be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any
next...
There are different options for duster propellant: HFC-134a: Nonflammable, most common for industrial applications when spraying energized circuits because of the risk of a spark lighting a flammable
next...
Avoid cheap retail dusters that contain bitterant, if you are working on sensitive electronics. Many retail dusters have bitterant added to prevent huffing when duster is used in the home, there is concern
next...
Internal pressure, as measured in pounds per square inch (PSI), depends on the propellant used in the duster: HFC-134a - 71, HFC-152a - 63, HFO-1234ze - 47.
next...
There are different options for duster propellant:
HFC-134a: Nonflammable, most common for industrial applications when spraying energized circuits because of the risk of a spark lighting a flammable
next...