Eco-Oven Cleaner

Sku Number Name Size
1573-QT Eco-Oven - 1 qt 1 qt (0.95L)
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Used for periodic preventative maintenance to keep equipment running at top performance levels. Cleans reflow ovens, wave soldering systems, and associated heat exchanger systems by removing all types of flux residues (e.g. water­based, RMA, no­clean, lead­free). It is fast acting and more effective and safe than IPA for baked­on flux residues.

Features & Benefits

  • Quickly clean flux residue from oven & wave fingers
  • Safe on warm ovens
  • Nonflammable
  • Low VOC, zero GWP
  • Non-ozone depleting

Applications

  • Removal of baked-on flux residues from SMT oven and wave equipment
  • Maintenance cleaning for heat exchange systems (NOTE: rinse thoroughly from aluminum and copper)
  • Finger cleaning in wave solder equipment
  • Remove accumulated flux from wave solder pallets

FAQ's

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techsprayeu.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techsprayeu.com/batch-codes.

Articles

Isopropyl Alcohol (IPA) Replacements for Electronic Assembly and Repair
Techspray offers alternatives to IPA that are as effective if not more so, and in many cases nonflammable with lower environmental impact. Techspray offers IPA alternatives for: Electronic printed circuit board (PCB) assembly Removal of solder paste or adhesive from SMT stencils Maintenance cl...
Read This Post

Cleaners developed to minimize global warming effect
With global warming in the news and greenhouse gases getting more regulatory attention, electronic and industrial manufacturers are on the look-out for ways to reduce carbon emissions. Techspray has been developing products for over a decade that have much lower Global Warming Potential (GWP), witho...
Read This Post

A Thorough Comparison of Water Based Cleaners and Solvent Cleaners
With the growing popularity of water based cleaning chemistries and new solvent technologies, the debate between water based and solvent cleaners rages on. Companies that have cleaning requirements, including industrial, precision, and specification driven applications must decide which material is ...
Read This Post
You did not finish submitting your information to request a sample